ESD F-911 C-950 Static Dissipative
Vinyl-Based Foam Coating
F-911 C-950 is a static dissipative vinyl-based coating used to seal unskinned polyurethane foams. F-911 C-950 can also be used on molded polyurethane and closed cell foam containing vinyl where ESD safe surfaces are needed.
Other Features Include
- Excellent flexibility, scuff resistance [eliminates FOD], cushioning and non-skid properties.
Alternative Products
You might also be interested in these products similar to ESD F-911 C-950 Static Dissipative:Specifications
Product Specifications:
Solids: (wt.) 26%
Tensile: [ASTM D-412] 713 psi
Elongation: [ASTM D-412] 364%
Temperature use range: -0°F to 200°F
Block Resistance: 4 hours at 140°F
Conductivity: 10/7- 10/9
Shelf life: 1+ year at 77°F unopened container
Coverage: 80 sq. ft. per gal. at 5 mils
Finish: Satin
Chemical Resistance: ASTM D1308
Acids, alkalines, alcohols: Excellent
Petroleums: Good
Ketones: Limited
Disclaimer
We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing VOC regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLASTI DIP INTERNATIONAL technical service.