F-931/F-931 s Containment Coating
Cross Linked Glass Containment Coating

F-931 is a flexible, cross linked, high performance, high-strength, fast set water-based coating. F-931 provides excellent glass particle containment for all types, shapes and sizes of glass products and containers. It’s very low VOC’s, non-flammable and high solids content make it an Emission Control Coating System, eccs®, that can be air-dried or heat cured to meet production demands. F-931 can be dipped or brushed, is available in clear as well as a variety of custom colors. F-931 exhibits excellent chemical, impact, abrasion, tear strength, UV and block resistance and offers excellent heat/non-yellowing properties.
Typical applications include protecting/containment of low temperature CFL/CFT bulbs, colored/decorating low temp CFL/CFT bulbs, all types of glass products and containers. Use F-931‘s’ for spray applications.
Applications
- Protecting/containment of low temperature CFL/CFT bulbs
- Colored/decorating low temp CFL/CFT bulbs
- All types of glass products and containers
Alternative Products
For other products you might also be interested in that are similar to F-931/F-931 s Containment Coating, please contact our customer service.Specifications


F931 Specifications: Best Result With 130°F cure to crosslink
Solids: (wt.) 41-43%
Finish: Semi-gloss
Elongation: ASTM D 412 825%
Abrasion: Excellent
Tensile: ASTM D 412 3680 psi
Permeability: Limited
Tear resistance: ASTM 1004 .70
Temperature use range: -0°F to 250°F.
Freeze thaw stability: Excellent
Weatherability: (ASTM G-53) Excellent 7-10 years
Shelf life: 1+ years at 77°F unopened container
Chemical Resistance:
Petroleum: Excellent
Acid, alkaline: Good
Alcohol, ketone, chlorinated solvent: Limited
Disclaimer


We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing VOC regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLASTI DIP INTERNATIONAL technical service.