Contact Us - Product Specific
Sending

HCF eccs®/AIM Compliant Coating/RTS meets requirements for AIM Industrial Maintenance Coating of 450 g/l or less VOC.
HCF eccs ®/AIM Compliant Coating/RTS is an air dry, all in one primer/top coat, flexible acrylic water base coating that can be easily applied by brushing or dipping. HCF eccs®/AIM Compliant Coating/RTS resists corrosive, caustic and acidic agents, most chemicals, chemical fumes, abrasion, impact and extreme weather conditions. Excellent for use on hand rails, brackets, HVAC equipment, pipes, pipe hangers ect.

HCF eccs®/AIM Compliant Coating/RTS bonds to metal, wood, concrete and plastics without primers. HCF eccs®/AIM Complaint Coating/RTS has the safety of water base with the performance of solvent base coatings. It’s very low V.O.C.’s, non-flammable and high solids content make it an Emission Control Coating System, eccs®, that can be air dried or heat cured to meet production demands. Use HCF eccs®/ AIM Complaint Coating for dipping or brushing applications.

Other Features Include

  • Use for dipping and brushing applications
  • AIM compliant
  • Resists corrosive

Applications

  • Hand Rails
  • Brackets
  • HVAC Equipment
  • Pipes

Alternative Products

You might also be interested in these products similar to HCF eccs®/AIM Compliant Coating/RTS:

Specifications

Product Specifications:

Solids: (wt.) 36%

Shelf life: 1+ years at 77°F unopened container

Weatherability: (ASTM G-53) Excellent 7-10 years

Coverage: 100 sq. ft. per gal. at 5 mils

Chemical Resistance:

petroleum: Excellent

acid, alkaline: Good

alcohol, ketone, chlorinated solvent: Limited

water soak: Limited

Disclaimer

We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing V.O.C. regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLAST DIP INTERNATIONAL technical service.

Product
Development Lab

For new or customized formulations specifically developed to meet your requirements.

 

 

 

Access Lab