Contact Us - Product Specific

HCF® is a flexible acrylic, water-based coating that can be dipped, brushed or sprayed, is available in a wide variety of colors and exhibits excellent petroleum, chemical, UV, corrosion and abrasion resistance. Typical applications include protecting and color coding transformers, coils, tools, fixtures and brackets, oil handling equipment, heavy machinery, and chain link fence components. HCF® bonds to metal, wood, concrete and plastics without primers. HCF® has the safety of water-based coatings with the performance of solvent-based coatings.  Its very low VOC’s, non-flammable and high solids content make it an Emission Control Coating System, eccs®, that can be air-dried or heat cured to meet production demands.  Use HCF® F-688‘s’ for spray applications.

Alternative Products

For other products you might also be interested in that are similar to HCF eccs® F-688/F-688 s, please contact our customer service.


F688 Product Specifications:

Solids: (wt.) 36%

Elongation: (ASTM D-2370-82) 230% 

Finish: Semi-gloss

Abrasion: (ASTM D-4060) 0.0005 inches/100 cycles

Tensile: (ASTM D-2370) 230 psi

Permeability: Limited

Temperature use range: -0°F to 250°F

Weather ability: (ASTM G-53) Excellent 7-10 years

Coverage: 100 sq. ft. per gal. at 5 mils

Dielectric (ASTM D-149) 1,100 v/mil

Shelf life: 1+ years at 77°F unopened container

Chemical Resistance:

Petroleum: Excellent 

Acid, alkaline: Good

Alcohol, ketone, chlorinated solvent:  Limited


We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing VOC regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLASTI DIP INTERNATIONAL technical service.

Development Lab

For new or customized formulations specifically developed to meet your requirements.




Access Lab