Contact Us - Product Specific

F-1059 is a unique, high performance thermoplastic polyurethane IMC [in mold coating] that is spray-applied into the mold tool to provide a durable, flexible, chemical and UV resistant coating on flexible urethane molded products.

F-1059 IMC is a thermoplastic polyurethane coating typically spray-applied as an in mold coating [IMC] for molded flexible and rigid polyurethane foams.   

F-1059 IMC is specifically designed for use in aluminum molds where high temperature applications are needed, 115-145°F.

F-1059 IMC provides a 0.5-1.5 mil coating that acts as a barrier and protects molded foams from UV, moisture, impact, puncture, abrasion, and chemicals while providing a durable flexible finish.

Other Features Include

  • Intended for use in molds with starting temps 115-145°F
  • Wide selection of colors
  • Single component - no catalyst
  • Fast dry time
  • DMF free


Alternative Products

You might also be interested in these products similar to PDC® F-1059 IMC DMF-FREE:


F1059 Product Specifications:

Solids: (wt.) 11%

Tensile: [ASTM D-412] 4500 psi

Temperature use range: -0°F to 250°F

Elongation: [ASTM D-412] 630%

Block resistant: 4 hours at 200°F

Tear Strength: [ASTM D-1004] N/A

Shelf life: 1+ years at 77°F unopened container        

Finish: Semi-gloss

Coverage: 180 sq. ft. per gal. at 1 mil


We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing VOC regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLASTI DIP INTERNATIONAL technical service.

Development Lab

For new or customized formulations specifically developed to meet your requirements.




Access Lab