PDC® F-753 Muraculon/PDC® F-881 Muraculon [low VOC]
Vinyl-Based Foam Coating

F-753 Muraculon is a unique vinyl based coating that when spray applied provides a durable, flexible protective coating on polyurethane foams. F-753 can also be used on molded polyurethane and closed cell foam containing vinyl.
F-753 Muraculon coating is most commonly used as “edge spray” for noise deadening/ insulation foam products for over the road, heavy equipment and agricultural equipment. F-753 is a tough coating that adds durability, moisture, heat, UV, abrasion, puncture and chemical resistance to foam products used in severe conditions. F-753 is also used for protecting acoustical panels for interior noise abatement. F-753 Muraculon is an excellent, cost effective replacement for Hypalon coating.
Other Features Include
- Wide selection of colors
- Single component - no catalyst
- Passes requirements for UL94 HBF
- Fast dry time
- Does not cause artifacts in most imaging applications
Applications
- Over the road
- Heavy equipment
- Agricultural Equipment
- Acoustical Panel
Alternative Products
For other products you might also be interested in that are similar to PDC® F-753 Muraculon/PDC® F-881 Muraculon [low VOC], please contact our customer service.Specifications


F753 / F881 Product Specifications:
Solids: (wt.) 24%
Tensile: [ASTM D -412] 1010 psi
Temperature use range: -0°F to 200°F
Elongation: [ASTM D-412] 340%
Block resistance: 4 hours at 160°F
Shelf life: 1+ year at 77°F unopened container
Coverage: 80 sq. ft. per gal. at 5 mils
Finish: Matte-satin
Chemical Resistance: In House Test [ASTM D-1308]
Mineral oil: Very good
Machine oil: Very good
Saline: Very good
Blood: Very good
Urea (6% in H2O): Very good
All-purpose cleaner: Very good
Betadiene (Iodine): *Very good
Acid (10% sulfuric in H2O): Very good
Gasoline: Good
Alcohol: Very good
*stained after 5 minutes.
Disclaimer


We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing VOC regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLASTI DIP INTERNATIONAL technical service.