PDC® F-830 Muraculon
Vinyl-Based Foam Coating
F-830 Muraculon is a unique vinyl-based coating that when spray-applied provides a durable, flexible protective coating on polyurethane foams. F-830 can also be used on molded polyurethane and closed cell foam containing vinyl.
F-830 Muraculon will produce a skin/membrane on unskinned polyurethane foam to create a barrier to moisture and chemicals. This skin has excellent resistance to fluids and petroleum. F-830 is a tough coating that adds durability to foam and imparts abrasion as well as puncture resistance.
These qualities find particular use in the medical industry, where cushioning and positioning devices are fabricated and used in sterile environments, as well as therapeutic practices. Other uses include cushioning for athletic devices, seat cushions, packaging and acoustical panels. F-830 is an excellent, cost effective replacement for Hypalon® coating.
Other Features Include
- Wide selection of colors
- Single component – no catalyst
- Passes UL94 HBF
- Does not cause artifacts in most imaging applications
Applications
- Cushioning for athletic devices, seat cushions, packaging and acoustical panels.
- F-830 is an excellent, cost effective replacement for Hypalon® coating.
Alternative Products
You might also be interested in these products similar to PDC® F-830 Muraculon:Specifications
F830 Product Specifications:
Solids: (wt.) 26%
Tensile: [ASTM D-412] 1200+psi
Temperature use range: -0°F to 200°F
Elongation: [ASTM D-412] 315%
Block resistant: 4 hours at 140°F
Tear Strength:[ASTM D-1004] .125
Coverage: 80 sq. ft. per gal. at 5 mils [dft]
Finish: Matte-satin
Shelf life: 1+ year @ 77° f unopened container
Chemical Resistance: In House Test Results (ASTM D1308)
Mineral oil: Very good
Machine oil: Very good
Saline: Very good
Blood: Very good
Urea (6% in H2O): Very good
All purpose cleaner: Very good
Betadiene (Iodine): *Very good
Acid (10% sulfuric in H2O): Very good
Gasoline: Good
Alcohol: Very good
*stained after 5 minutes.
Disclaimer
We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing VOC regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLASTI DIP INTERNATIONAL technical service.