Contact Us - Product Specific
Sending

F-877‘s’ is a fast dry, high quality, water base vinyl used for IMC [in mold coating] or PMC [post mold coating] as a finish coat over an IMC or directly on other types of foam such as EVA, PVC, polystyrene or minicell.

Applications include athletic padding, medical pads, seating, automotive components, polypropylene buoys, polystyrene dock floatation blocks, etc. F-877‘s’ is also a high solids, very low VOC material, which makes it an Emission Control Coating System, eccs®.

Other Features Include

  • Non-flammable, very safe
  • Very low VOC’s
  • Technical support second to none
  • Unmatched strength, durability and dry time

Alternative Products

You might also be interested in these products similar to PDC® F-877 s eccs®:

Specifications

Product Specifications:

Solids (wt.): 51%

Tensile: (ASTM-D 412) 960 psi 

Temperature use range: 0°F to 120°F

Elongation:  (ASTM-D 412) 540%

Block resistant: 4 hours at 120°F

Shelf life: 1+ year at 77°F unopened container

Coverage: 150 sq. ft. per gal. at 5 mils

Finish: Gloss

Tear Resistance: (ASTM D1004) .14

Chemical Resistance: In House Test Results [ASTM D-1308]

Ketone: Poor

Aromatics: Fair

Aliphatics: Good

Alcohols: Good

Acids: Good

Glycol: Fair

Disclaimer

We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing VOC regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLASTI DIP INTERNATIONAL technical service.

Product
Development Lab

For new or customized formulations specifically developed to meet your requirements.

Access Lab