PDC® F-892 Satin Top Coat
Vinyl-Based Satin Top Coat
F-892 is a vinyl-based clear top coat which is used over F-818 or F-861 as well as Muraculon coatings as a satin finish. While remaining soft and flexible, F-892 will also improve tensile strength, abrasion, block and stain resistance.
Alternative ProductsYou might also be interested in these products similar to PDC® F-892 Satin Top Coat:
Solids: (wt.) 3.5%
Coverage: 175 sq. ft. per gal. at 1 mil
Shelf life: 1+ years at 77°F unopened container
Temperature use range: -30°F to 200°F
Block resistance: 4 hours at 140°F
Chemical Resistance: In House Test Results [ASTM D-1308]
Mineral oil: Very good
Machine oil: Very good
Saline: Very good
Blood: Very good
Urea (6% in H2O): Very good
All purpose cleaner: Very good
Betadiene (Iodine): *Very good
Acid (10% sulfuric in H2O): Very good
Alcohol: Very good
*stained after 5 minutes.
We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing VOC regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLASTI DIP INTERNATIONAL technical service.
For new or customized formulations specifically developed to meet your requirements.