Contact Us - Product Specific
Sending

F-987 IMC is the unique blend of aliphatic urethane and thermoplastic polyurethane resins, typically spray applied as an in mold coating [IMC] for molded flexible and rigid polyurethane foams.

F-987 IMC can be used in many different types of molds such as silicone, epoxy and aluminum and performs best when used in aluminum molds between 70-115 F.

F-987 IMC provides a ½ -2 mil coating that acts as a barrier and protects molded foams from UV, moisture, impact, puncture, abrasion, and improved chemicals resistance over F-953 IMC while providing a durable flexible finish. F-987 is also DMF Free.

Other Features Include

  • Intended for use in molds starting at 90-120 ° F
  • Wide selection of colors
  • Single component - no catalyst
  • Fast dry time

Applications

  • Athletic Padding
  • PMC (post mold coating)
  • IMC
  • EVA
  • PVC
  • Polystyrene
  • Minicell

Alternative Products

For other products you might also be interested in that are similar to PDC® F-987 IMC, please contact our customer service.

Specifications

F-987 Product Specifications:

Solids: (wt) 13%

Tensile: [ASTM D-412] 2126 psi

Temperature use range: -0°F to 250°F

Elongation: [ASTM D-412] 268%

Block resistant: 4hr @ 140°F

Tear Strength: [ASTM D-1004] .25

Shelf life: 1+ years @ 77 f unopened container

Finish: semi gloss

Coverage: 180 sq. ft. per gallon at 1 mil

Chemical Resistance: In House Test Results (ASTM D1308) NOT YET TESTED

Mineral oil: very good

Machine Oil: very good

Saline: very good

Blood: very good

Urea (6% in H2O): very good

All purpose cleaner: very good

Betadiene (Iodine): *very good

Acid (10% sulfuric in H2O): very good

Gasoline: very good

Alcohol very good

 

*stained after 5 minutes

Disclaimer

We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the applications of this information or the safety and suitability of our products, either alone or in combination with other product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products whether used alone or in combination with other products. Ever changing VOC regulations in your area may require you to contact local authorities for proper use and/or disposal of this product. Should you need further assistance, please contact PLASTI DIP INTERNATIONAL technical service.

Product
Development Lab

For new or customized formulations specifically developed to meet your requirements.

 

 

 

Access Lab